简介
apacer, in consideration of cost and capacity for customers, introduces the mlc (multi-level cell) offerings with cost structure advantage, safd 18p-m. the safd 18p-m features a cost-effective mlc (multi-level cell) flash memory and a built-in 7+9 pin sata connector. it has maximum capacities of 16gb, 32gb, 64gb,128gb and 256gb, with sequential read/write speeds reaching up to 250 and 165 mb/sec, respectively. to work normally in harsh operating environments, apacer safd 18p-m employ the flash vendor guaranteed wide-temp chip, which means it can run stably under industry-level extended-temperature (-40°c ~ 85°c) environments for the highest reliability and longest lifespan. and also, it boasts a built-in s.m.a.r.t. (self-monitoring, analysis, and reporting technology) technology and intelligent power failure recovery function to safeguard data and enhance product stability.
突出显示
perfect replacement of 1.8 inch sata hdds
global wear-leveling and block management
built-in ata secure erase and s.m.a.r.t. functions
power failure recovery
trim command support
mlc extended temperature support
规格
型号 safd 18p-m  
接口 sata 2.0 (3gb/s)   
连接器 (7+9) pin male  
外形(英寸) 1.8  
nand闪存类型 mlc  
容量 16gb~256gb  
持续读取能力(mb/秒) up to 250  
持续写入能力(mb/秒) up to 165  
ecc支持 built-in hardware ecc, enabling up to 16/24 bit correction per 1k bytes  
标准工作温度 0 ~ + 70   
扩展工作温度 ( °c ) -40 ~ + 85＊
(＊=supports 32gb~256gb)
存储温度 -40 ~ + 100  
冲击 50g  
振动 15g  
湿度 5%~95%  
工作电压 3.3v & 5v  
低功耗 active mode(max): 819ma & idle mode: 194ma  
尺寸(mm) 78.3(l)x54(w)x5(h)

---

深圳市联乐实业有限公司

15917205725
中国 深圳